Re-Pairing Inventory Scanners

Everyone can now re-pair the BT scanners out in the field without our interaction.

Process below:

Open Mobilock BT manager from the home screen.



1.Locate the current CS3070 scanner at the top of the list. Click on it then select forget.

2.Place the scanner in BT pair mode by holding the round button at the bottom of the scanner until it beeps and flashes.

3.Locate CS3070:1234567891234578. (Numbers are random).

4.Click on the CS3070 and click on pair. Scan the bar codes provided with the print out sheet making sure to scan the enter barcode when finished.

5.Pay attention to the bottom the tablet as a message will pop up saying the scanner is connected, then about 5 seconds later it will say disconnected.

6.The scanner should still have the blinking blue light. Tap that button once and wait for the light to turn off.


Tap that round button one more time to hear an audible chirp and see a message at the bottom of the tablet stating the scanner is now paired.


Done!
Creation date: 2/7/2018 12:35 PM      Updated: 2/7/2018 12:35 PM
Files   
DataImage25.jpeg
4.2 KB
scanner codes.pdf
13 KB